PSI6100.354-L1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911170782
The PSI6100.354-L1 is a medium frequency inverter from the PSI Frequency Inverters series by Bosch Rexroth Indramat. It features a mains voltage range of 400 to 480 VAC, a force full scale of 10 kN, and is protected to the IP20 rating. The inverter uses air cooling, supports up to 256 programs, and operates at a maximum altitude of 2000 meters.
Internal Product Review
The PSI6100.354-L1 is a medium frequency inverter with air-cooled operation that supports clean, dependable thermal performance. A 400–480 VAC mains range and 1000 Hz sequence frequency give the design strong responsiveness and stable control in demanding cycles. INTERBUS timing and capacity for 256 programs make the platform a strong choice for repeatable production setups.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PSI6100.354-L1 is a medium-frequency inverter manufactured by Bosch Rexroth Indramat for the PSI Frequency Inverters series. As a medium-frequency inverter, it supplies regulated power to industrial actuators that require accurate force profiles and tightly controlled cycle times in automated assemblies. Heat generated by the power stage is removed through an air-cooled design, so no external liquid circuit is required.
This inverter accepts a three-phase input of 400–480 VAC and transfers data across the INTERBUS fieldbus at a rate of 2 Mbaud. Within the control word, force values are delivered through an 8-bit command width, and peak mechanical output is limited to 10 kN. Mechanical clamping can be held briefly because the minimum squeeze interval is 16 ms. The inverter can drive ten electrodes simultaneously, based on the internal electrode count parameter. The protective enclosure has an IP20 rating, providing finger-safe shielding when the unit is mounted inside a panel. Timing coordination relies on the INTERBUS timer, while INTERBUS ID code 3 identifies the device on the network.
The command sequence is executed at 1000 Hz, allowing high-resolution profiling without overloading the communication layer. Reliable operation is maintained at elevations up to 2000 m, and the internal memory can store as many as 256 user programs. Parameter uploads and diagnostic communication occur through a V24/RS232 interface that connects to a 9-pin D-Sub connector. A replaceable 3.6 V lithium AA battery supplies energy for the real-time clock and data retention. Electrical insulation supports phase-to-ground potentials as high as 480 VAC. A PS5 IBS OPC2 I/O board connects discrete sensors to the control system. Climatic category 3K3 indicates the permissible temperature and humidity range for installation inside a cabinet.
