COVID-19 Update: Wake Industrial is open and available to support your automation needs.
The PPC-R22.1N-T-NN-P1-NN-FW has a power PC- processor, 8 MB SDRAM, four-digit display and digital inputs/outputs. It has a real-time clock with an optional battery backup and a memory module with 4 MB SRAM. PPC-R22.1N-T-NN-P1-NN-FW has a battery backup for PMM and RTC.
The recommended temperature for operating PPC-R22.1N-T-NN-P1-NN-FW is 0...+45 °C for operation and -25...+70 °C during transport and storage. Manufacturers recommend air pressure that ranges between 86 - 106 kPa (operation) 70 - 106 kPa (transport, storage). The battery should be replaced every year if the real-time clock and the optional PMM memory module are used. The PPC-R22.1N-T-NN-P1-NN-FW contains reactive chemicals in a very solid housing. Improper handling may result in material damage or injuries. When handling the PPC-R22.1N-T-NN-P1-NN-FW do not reactivate discharge batteries by heating them at a higher temperature which will cause cauterization and explosion. Do not charge non chargeable batteries. Do not dismantle batteries and never throw batteries into a fire.
Safety information kit must be provided with certain drive controllers and motors including PPC-R22.1N-T-NN-P1-NN-FW. Improper handling can cause material damage or serious injuries. Before you could operate any of the equipment make sure you are familiar with all the safety instructions, otherwise it will cause harm to the body and cause death in severe cases. Do not expose PPC-R22.1N-T-NN-P1-NN-FW to extreme conditions like very high temperature, it will cause explosion. Make sure the connections are right, high electric voltage due to wrong connections will cause bodily harm or danger to life. If you have metal implants, you can suffer health hazards. The surface of the housing the PPC-R22.1N-T-NN-P1-NN-FW could be extremely hot, and it has danger of serious burns and injury.
|Housing Version:||for RECO unit|
|Memory Expansion Module:||Not Fitted|
|Configuration:||Not Equipped / PROFIBUS-DP Master Module / Not Equipped|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2020 - Wake Industrial - All Rights Reserved