PPC-R01.2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PPC-R01.2 is a control unit from the PPC Controllers series with a supply voltage of 24 VDC and a maximum power of 52 W. It features 3 digital inputs, 2 digital outputs, and supports up to 6 Bt Bus devices along a 50 meter bus length. The unit has a protection rating of IP20 and weighs 1.1 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PPC-R01.2 is a control unit manufactured by Bosch Rexroth Indramat for the PPC Controllers series. Designed for DIN-rail or cabinet mounting, the device coordinates motion and process sequences in industrial automation cells by exchanging data with field I/O and higher-level PLCs. It occupies only 41.5 mm of rack width, measures 150 mm deep by 192 mm high, and weighs 1.1 kg, so it can be integrated into tight electrical enclosures without exceeding panel load limits. This layout suits installations where the controller must sit close to drives, terminals, and other cabinet hardware without taking excessive panel space.
The controller operates from a regulated input of 24 V DC and draws a maximum of 0.7 A on that line during peak processing demand. Three opto-isolated digital inputs accept machine status or sensor signals, while two transistor digital outputs switch actuators; the respective channel counts of 3 and 2 show the onboard I/O capacity for direct wiring. Each output can change state within 400 µs max, allowing the unit to react quickly to real-time events. Internally, a 50 m Bt bus links up to six peripheral modules, and the unit uses the RECO housing format with Design Version 2 so slot spacing and grounding points remain consistent across Series 1 racks.
Total internal dissipation is limited to 52 W max, and separate back-plane regulators supply up to 3.0 A max at 5 V and 2.3 A max at 24 V for attached I/O cards. The electronics have an IP20 protection rating, which guards against accidental finger contact but still requires installation inside a closed control cabinet to prevent dust or liquid ingress. The Bt bus length ceiling allows remote racks to be placed across larger machine sections while maintaining signal integrity. Attached modules receive back-plane power from the controller, which helps support distributed I/O arrangements without adding a local supply to every card.
Frequently Asked Questions about PPC-R01.2:
Q: How many digital inputs are available on the PPC-R01.2 controller?
A: The PPC-R01.2 controller offers three digital inputs for connectivity to external signals.
Q: What supply voltage is required for the PPC-R01.2 controller?
A: This unit is designed to operate with a supply voltage of 24 VDC.
Q: What is the total power consumption specification for the PPC-R01.2 controller?
A: The maximum total power consumption for the PPC-R01.2 is 52 watts.
Q: What is the maximum BT bus length supported by the PPC-R01.2?
A: This controller supports a maximum BT bus length of 50 meters.
Q: How many digital outputs are featured on the PPC-R01.2 unit?
A: The PPC-R01.2 provides two digital outputs for controlling connected devices.
