PPC-P11.1N-N-N1-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911296298
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat PPC-P11.1N-N-N1-NN-NN-FW is a control unit in the PPC Controllers series. It uses a 32-bit PCI bus with a bus clock rate of 33 MHz and has a compact flash capacity of 32 MB. The device features 16 PLS outputs rated at 250 mA each and supports up to 40 drives.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat PPC-P11.1N-N-N1-NN-NN-FW belongs to the PPC Controllers series and functions as a control unit for multi-axis drive systems. Packaged in an industrial PC housing, it slides into a backplane to supervise motion sequences, interpolation, and I/O coordination for machinery with multiple servo or inverter axes. The card format allows high-level control logic to operate beside standard PC peripherals in the same enclosure. This arrangement lets the control unit manage coordinated motion and machine I/O from a single board-level platform inside the PC chassis.
The controller interfaces to the host computer over a 33 MHz back-side clock, so command and status words are refreshed quickly to keep drive synchronization tight. Its 32-bit data path allows single-cycle transfers of double-word parameters such as position or velocity. Using a PCI bus means the board fits conventional PC-104 or passive backplanes without proprietary connectors. A local CompactFlash stores application code, and the installed capacity is 32 MB. That combination supports predictable communication with the host system during continuous motion tasks and routine control updates. The board draws 1.4 A from the 3.3 V rail and 0.45 A from the 5 V rail, while the edge connector can pass up to 2 A to attached option hardware. Its mechanical dimensions are 175 mm in length and 107 mm in height, and the unit is design version 1.
The integrated PLS module drives up to 40 axes through two 26-pin connectors. Each connector carries eight outputs for a total of 16 position latch signals. These outputs switch field devices at 24 VDC and can source up to 250 mA per channel for light curtains, valves, or relays. Output states are recalculated every 250 µs, so cams remain aligned even at high line speeds. The short update interval helps maintain consistent switching timing during fast indexing and synchronized packaging operations. Two connectors support the NSW01 option card when additional latch points are required.
Frequently Asked Questions about PPC-P11.1N-N-N1-NN-NN-FW:
Q: What is the maximum number of drives supported by the PPC-P11.1N-N-N1-NN-NN-FW?
A: This controller can support up to 40 drives for coordinated motion control tasks.
Q: What is the compact flash memory size of the PPC-P11.1N-N-N1-NN-NN-FW?
A: The installed compact flash memory is 32 MB on this model.
Q: What bus type and width is featured in the PPC-P11.1N-N-N1-NN-NN-FW controller?
A: The bus type used is PCI with a 32-bit width for data transfer.
Q: How many PLS outputs are included on the PPC-P11.1N-N-N1-NN-NN-FW controller, and what is their supply voltage?
A: There are 16 PLS outputs available with a supply voltage of 24 VDC.
Q: What is the design version of the PPC-P11.1N-N-N1-NN-NN-FW controller?
A: The PPC-P11.1N-N-N1-NN-NN-FW is manufactured in Design Version 1.
