PPC-P01.1A-N-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911291158
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
59 Seconds
The Bosch Rexroth Indramat PPC-P01.1A-N-NN-NN-NN-FW is a control unit in the PPC Controllers series and uses a Power PC microprocessor with 8 MB of SDRAM main memory. It features a 4 MB SDRAM data memory, an RS232 diagnosis interface, and expansion capabilities with a PC/104 interface. The unit measures 293 mm wide, 142 mm high, 23 mm deep, and weighs 240 grams.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PPC-P01.1A-N-NN-NN-NN-FW control unit is produced by Bosch Rexroth Indramat within the PPC Controllers series. As a dedicated automation controller, it supervises motion sequences and peripheral tasks by exchanging data with drives and field devices over real-time networks. Installed inside machine control cabinets, the module provides the central processing and memory resources required to coordinate servo axes and I/O points in industrial production lines.
At the heart of the board is a PowerPC microprocessor that uses 8 MB SDRAM of main memory and accesses an additional 4 MB SDRAM segment reserved for buffered process data. A soldered 256-byte serial EEPROM stores persistent parameters, while a plug-in 4 MB expansion module allows program growth. The electronics draw up to 1.5 A from the regulated backplane supply at 5 VDC, so cabinet power budgeting must account for this peak current. To link motion drives, the controller carries a SERCON 816 Sercos chipset and exposes a PC/104 stack connector for fieldbus or I/O extensions, allowing the unit to process cyclic setpoint traffic without overloading the central bus.
The card shares status information through a RS232 diagnostic port and a Mini-DIN 8-pin service socket that support firmware loading and live trace functions. Host communication with the PLC rack is handled by an ISA edge connector, and further hardware layers can slide onto the PC/104 header without increasing the overall footprint. The unit has a width of 293 mm, a height of 142 mm, and a compact depth of 23 mm, which supports straightforward DIN rail insertion. Despite the board area, the assembly weighs only 240 g, and a Renata CR2477N lithium cell maintains real-time clock data during power loss while the design version 1 housing protects the electronics from debris encountered in automated machinery.
Frequently Asked Questions about PPC-P01.1A-N-NN-NN-NN-FW:
Q: What battery type is required for the PPC-P01.1A-N-NN-NN-NN-FW controller?
A: The PPC-P01.1A-N-NN-NN-NN-FW uses a Renata CR2477N battery for backup power.
Q: How much main memory does the PPC-P01.1A-N-NN-NN-NN-FW controller provide?
A: This controller features 8 MB of SDRAM for main memory, providing faster access to system resources.
Q: What expansion interface does the PPC-P01.1A-N-NN-NN-NN-FW offer for add-ons?
A: A PC/104 expansion interface is present for connecting compatible modules or peripheral devices.
Q: What type of diagnosis interface is available on this PPC controller?
A: The controller is equipped with an RS232 diagnosis interface for monitoring and troubleshooting.
Q: What is the max current draw of the PPC-P01.1A-N-NN-NN-NN-FW controller?
A: The maximum current draw for the PPC-P01.1A-N-NN-NN-NN-FW controller is specified at 1.5 A.
