Product Description

The Rexroth MTS-R02.2-M2-B1-P2-NN-FW is a SPC in small-size format. For installation it requires 2 slots in a RMB20.2 module carrier. The MTS-R02.2-M2-B1-P2-NN-FW can be used as either a standalone SPC with corresponding I/Os or with motion control as a combined CNC-SPC system. BT interface on the system can be used to interface with operating devices such as BTM15/16 or BTA20. Three options slots are provided on the system for installation of optional modules. Rexroth also manufactures the MTS-R01.2 SPC with one slot for optional modules. The MTS-R01.2 can also be used in standalone and combined modes and takes up one slot in the RMB module carrier. The MTS-R02.2-M2-B1-P2-NN-FW is programmed from SPC program software running on a PC which is connected to the SPC through the programming interface which supports RS-232/422/485 serial protocols.

The maximum length of serial cable between the system and PC with SPC software can be up to 15 meters. The MTS-R02.2-M2-B1-P2-NN-FW has a mechanical RECO design and comes in IP20 rated enclosure. It is shipped from the factory with Profibus-DP slave module and Interbus-S master module. RAM available on the system is 2 MB. Firmware is not installed on the system and needs to be ordered separately. The MTS-R02.2-M2-B1-P2-NN-FW can communicate over Interbus connections with remote I/Os and operator terminals. Maximum segment length supported by the Interbus protocol is 400 meters. Weight and dimensions of the MTS-R02.2-M2-B1-P2-NN-FW are 1.65 kilograms and 83.7 x 192 x 159 millimeters. Permissible cross section for cable supplying electrical power to the system is up to 1.5 mm². The system is designed for input voltage ranging from 18 to 28 Volts DC and draws maximum 2.6 Amps current. This unit can be shipped globally with a one-year warranty period from Wake Industrial.