Product Description

The MTS-P02.2-D2-B1-NN-NN-NN-FW is a high-end SPC control plug-in card from Rexroth Indramat. It belongs to the MTS-P product line 2 and design type 2. It can either be utilized as Master PLC or a Slave PLC, depending on the desired application. The MTS-P02.2-D2-B1-NN-NN-NN-FW can only be operated under the installation and mounting conditions, in the appropriate orientation and under the specified permissible environmental conditions. It is not recommended for use in scenarios where temperature variation is at the extreme.

Also, the MTS-P02.2-D2-B1-NN-NN-NN-FW cannot be used underwater. The acceptable air pressure range when in transit and operation is 660 – 1080 hPa at an altitude of 3.5 km and 860 – 1080 hPa at an altitude of 1.5 km. The ambient temperature at normal operating conditions should not fall below 0 degrees C or exceed 50 degrees C, as per DIN 40 040. In storage, the admissible air temperature range is -20 to +70 degrees C. The nominal and peak supply voltage of the MTS-P02.2-D2-B1-NN-NN-NN-FW have values of 5 Volts and 12 Volts respectively. This model features a 4^th generation INTERBUS-S master interface, and its RAM capacity is 2 MB. The housing of this SPC control is built for use with industrial PCs.

The firmware of the MTS-P02.2-D2-B1-NN-NN-NN-FW helps to differentiate between its application-specific functions, and it can be ordered as a separate package. Before connecting this module to the BTV20/30 or an industrial PC, the addresses must be parameterized via a DIP switch. If the MTS-P02.2-D2-B1-NN-NN-NN-FW is left in storage for over six months, user-specific data like Remanent data may be damaged. The battery on this plug-in card supports control operations and permanent charging. This unit can be shipped globally with a one-year warranty period from Wake Industrial.