MTS-R02.2-M2-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285072
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
47 Seconds
The Bosch Rexroth Indramat MTS-R02.2-M2-NN-NN-NN-FW is part of the MTS Servo Control Modules series and weighs 1.3 kilograms. It operates as a PLC with 2 MB of RAM and supports a nominal supply voltage of 24 VDC with a total power of 52 watts. The module has a housing size of 83.7 by 192 by 150 mm and is rated with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTS-R02.2-M2-NN-NN-NN-FW module belongs to the MTS Servo Control Modules series produced by Bosch Rexroth Indramat. As a servo control module, it occupies the automation rack to coordinate motion axes, exchange I/O data, and supervise drive parameters. It integrates into decentralized drive assemblies where programmable logic and communication are required between the drive stack and a higher-level controller. Within the rack, it links control functions with surrounding drive hardware and supports data exchange with connected modules.
The module draws a nominal bus voltage of 24 VDC, and under this supply its internal converters present a rated power demand of 52 W. During worst-case startup, the logic section consumes 0.7 A, so cabinet power budgets can be calculated accurately. Control tasks are handled by a PLC with 2 MB RAM, which stores user programs and retains runtime variables. Application code and diagnostic data are transferred over a multiprotocol programming port that supports RS232/RS422/RS485 signaling, allowing service PCs or field controllers to connect without extra adapters. Separate backplane supplies deliver 2.2 A at 24 V and 3.0 A at 5 V to the attached I/O cards, and the input ripple is limited to 5% to help prevent logic errors. Two mandatory rack slots position the CPU beside the system bus, while three optional slots remain free for fieldbus or technology extensions.
The housing measures 83.7 × 192 × 150 mm and weighs 1.3 kg, which supports dense stacking on a DIN rail and helps preserve clearance for adjacent modules and cable routing. The enclosure has an IP20 protection rating, and the ready relay is rated for 500,000 cycles, so switching wear remains predictable over time. The optional interface configuration is not installed, which leaves room for later expansion cards without changing the base wiring layout.
Frequently Asked Questions about MTS-R02.2-M2-NN-NN-NN-FW:
Q: What is the nominal supply voltage required for the MTS-R02.2-M2-NN-NN-NN-FW module?
A: The MTS-R02.2-M2-NN-NN-NN-FW servo control module operates with a nominal supply voltage of 24 VDC.
Q: How many optional slots are available in the MTS-R02.2-M2-NN-NN-NN-FW servo control module?
A: This MTS series module features three optional slots, enabling expansion with additional modules as needed.
Q: What programming interface options are available on the MTS-R02.2-M2-NN-NN-NN-FW?
A: The module is equipped with RS232, RS422, and RS485 programming interfaces for versatile connectivity.
Q: What level of protection does the MTS-R02.2-M2-NN-NN-NN-FW provide?
A: With an IP20 protection category, this unit is protected against solid objects larger than 12.5 mm but is not water-resistant.
Q: What is the total power consumption rating of the MTS-R02.2-M2-NN-NN-NN-FW control module?
A: The maximum total power consumption of the MTS-R02.2-M2-NN-NN-NN-FW is 52 W.
