Product Description:

The MTS-R02.2-M2-B1-B1-NN-FW is a servo control module manufactured by Bosch Rexroth Indramat for the MTS Servo Control Modules series. Mounted on a DIN rail, it regulates motion sequences and field I/O inside industrial machinery. This lets one compact controller coordinate axis commands with machine signals such as sensors, switches, and interlocks. The controller occupies a slot width of two modules, supports four BT bus devices on the internal backplane, and includes two built-in serial ports for point-to-point service. It also provides three expansion slots for communication or memory cards without changing the base unit.

Power is supplied at 24 VDC. At this input, the logic circuitry draws up to 700 mA and produces a heat loss of 19.6 W, so cabinet airflow must remove the generated heat during normal operation. The housing is rated IP20, which makes it suitable for installation inside an enclosed panel where it is protected from direct liquid exposure and accidental contact with internal parts is reduced. Mounting uses the TS 35×27×15 rail profile, which helps align it with other automation components and keeps the installation consistent across the cabinet. Ripple on the incoming supply is limited to 4 Vss, and the module can deliver up to 2.6 A of isolated power to external sensors and actuators.

The module can operate continuously at altitudes up to 1500 m without derating. Its separate communication port supports RS-232 / RS-422 / RS-485 signaling for links to operator terminals or higher-level controllers, while the programming interface and serial channels support RS-232 or RS-485 connections for service access and direct device communication. Overall mass is 1.65 kg, which keeps the unit manageable on a DIN rail while still providing a rigid housing. Shielded cable routing along the rail helps maintain stable serial data exchange, and the available terminal power is limited to the stated auxiliary output to help protect the upstream 24 V source from overload.