MTS-R01.2-M2-V1-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911291137
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MTS-R01.2-M2-V1-FW is part of the MTS Servo Control Modules series and features a DeviceNet Master (V1) fieldbus interface, supporting up to 63 DeviceNet slaves with a maximum of 256 bytes I/O per slave. This module operates at a nominal 24 VDC supply, has a 2 MB PLC RAM, and provides IP20 protection. It weighs 1.1 kilograms and has dimensions of 41.5 mm width, 192 mm height, and 150 mm depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTS-R01.2-M2-V1-FW is a servo control module produced by Bosch Rexroth Indramat for installation in modular automation racks in the MTS Servo Control Modules series. It functions as the central DeviceNet master card, coordinating I/O exchange between higher-level motion controllers and distributed drives or sensors on the network. By housing the fieldbus electronics and low-voltage power conditioning on one 41.5 mm-wide card, the unit simplifies cabinet wiring and leaves the main controller free to execute motion tasks. This arrangement also lets the rack exchange network commands and status data without adding a separate communications enclosure.
A built-in DeviceNet Master (V1) interface governs cyclic and acyclic messaging. The master can manage up to 63 slaves, and it allocates as much as 256 bytes of process data to each node, allowing sizable parameter blocks for servo drives. Local program variables reside in a 2 MB PLC RAM area that supports complex diagnostic routines without exhausting controller memory. Control electronics draw from a system bus that is stabilized at 24 VDC, and the card may consume as much as 52 W when every port and indicator is active. The default I/O address is $CE000, which allows the card to fit existing Sercos or Indramat MMC configurations without remapping legacy addresses.
The backplane distributes peripheral power through two dedicated feeds: the 24-volt segment can supply up to 2.2 A for external sensors, while logic circuits receive as much as 3.0 A at 5 V for transceivers and microcontrollers. Additional board protection is provided by a 4-amp time-lag fuse and an internal 0.5-amp self-resetting device to isolate shorts. Physical integration is straightforward because the card measures 192 mm × 150 mm × 41.5 mm and weighs 1.1 kg. An IP20 rating indicates that the module is finger-safe and requires installation inside a closed control cabinet for protection against dust and spills.
Frequently Asked Questions about MTS-R01.2-M2-V1-FW:
Q: What type of fieldbus interface does the MTS-R01.2-M2-V1-FW use?
A: The MTS-R01.2-M2-V1-FW module is equipped with a DeviceNet Master (V1) fieldbus interface.
Q: How many DeviceNet slaves can the MTS-R01.2-M2-V1-FW support?
A: This module allows connection of up to 63 DeviceNet slaves.
Q: What is the maximum I/O per slave for this DeviceNet module?
A: Each slave can utilize up to 256 bytes of I/O on the MTS-R01.2-M2-V1-FW module.
Q: What is the required supply voltage for the MTS-R01.2-M2-V1-FW module?
A: The nominal supply voltage required is 24 VDC for proper operation.
Q: What level of environmental protection does the MTS-R01.2-M2-V1-FW provide?
A: This model features a protection category of IP20, meaning it is protected against solid objects greater than 12.5 mm.
