Product Description:

The MTS-P02.2-D4-P1-NN-NN-NN-FW is a servo control module manufactured by Bosch Rexroth Indramat and supplied within the MTS Servo Control Modules series. Installed in an ISA backplane, the board supervises drive tasks, exchanges motion data with higher-level controllers, and sends operator messages to local panels. In production cells, it serves as the interface layer between power electronics and plant networks, allowing command execution and diagnostic feedback without a separate rack controller. Its role is centered on coordinating communication and control functions inside a compact motion system.

The communication interface includes RS232, RS422, and RS485 ports for setup, monitoring, and PLC handshaking. Discrete machine signals are handled through 16 digital inputs and 16 digital outputs operating at TTL level, while the BT bus can support four operator terminals for menu navigation and fault acknowledgment. For distributed I/O, the LK DPM01 controller works as a PROFIBUS-DP master, forwarding cyclic data directly to the ISA bus host. Power is supplied through the backplane with +5 V, +12 V, and -12 V rails, and the logic supply can draw up to 1.8 A. Ripple on these supply rails is limited to 50 mV, 120 mV, and 120 mV to help protect the microprocessor, and a ready relay rated at 24 V / 150 mA provides a hardware-ready signal after startup checks are complete.

The card has a footprint of 22 × 145 × 295 mm, which allows it to fit into a Euro-style enclosure alongside drives and I/O boards. The design includes space for 4 PC/104 modules, so encoders, motion coprocessors, or image sensors can be added without external wiring. This auxiliary stack can draw up to 2.5 A maximum from the backplane regulator. Even when fully populated, the assembly weighs only 0.3 kg, which helps keep the overall control hardware compact.