MTS-P02.2-D4-B1-P2-NN-NN-FW
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307530
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MTS-P02.2-D4-B1-P2-NN-NN-FW Servo Control Module is manufactured by Rexroth Indramat Bosch. This module is With Coprocessor mode and has a INTERBUS-S Master Module configuration. This Servo Control Module is part of the 2 series of MTS.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch MTS-P02.2-D4-B1-P2-NN-NN-FW is a PLC module. It weighs approximately 0.66 pounds and its dimensions are 22 x 145 x 295 millimeters. For optimal module operation, Bosch recommends that the area where the computer containing the MTS-P02.2-D4-B1-P2-NN-NN-FW is installed should have minimum ambient temperature of 0 degrees Celsius and maximum ambient temperature of 50 degrees Celsius. Furthermore Bosch also recommends that the relative humidity in the operating location should not exceed 75%, the atmospheric pressure range should be within 860 and 1080 hPa and the elevation of the location should be less than or equal to 1500 meters. If the MTS-P02.2-D4-B1-P2-NN-NN-FW module is operated outside these recommended ambient conditions then the performance of the module may be degraded and in extreme cases the module could also get damaged. The MTS-P02.2-D4-B1-P2-NN-NN-FW s a DC powered device and requires 5 / 12 Volts DC and maximum 1.8 Amps current.
The MTS-P02.2-D4-B1-P2-NN-NN-FW comes in an ISA card form factor which can be plugged into an industrial computer. Addition of optional PC/104 module can take the current requirement up to 2.5 Amps. A general serial interface is available on the MTS-P02.2-D4-B1-P2- NN-NN-FW and can be used for communication with printers and external memory modules. The serial port can be configured through software to support either RS 232, RS 422 or RS 485. The MTS-P02.2-D4-B1-P2-NN-NN-FW also supports a BT bus interface for communication with Bosch operator terminals. The PLC card to computer communication takes place through the ISA bus. The 5 Volts / 12 Volts DC power supply for the module is also provided through the ISA bus. Installation, operation and maintenance of the PLC module should be carried out by trained personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
