MTS-P01.2-D2-B1-S4-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307536
Ask for AvailabilityThe Bosch Rexroth Indramat MTS-P01.2-D2-B1-S4-NN-NN-FW belongs to the MTS Servo Control Modules series and measures 145 mm in height, 22 mm in width, and 295 mm in depth. It supports up to 4 BT bus devices, with 16 TTL inputs and 16 TTL outputs, and offers 2 RS232 ports and 2 RS422/485 ports. The module can manage a maximum of 256 Interbus segments spanning up to 12.8 km, has a buffer size of 256 bytes per port, and allows up to 512 users per configuration.
Internal Product Review
The MTS-P01.2-D2-B1-S4-NN-NN-FW is a Bosch Rexroth Indramat servo control module with 2 RS232 ports and 2 RS422/485 ports. Support for up to 256 Interbus segments and 12.8 km maximum Interbus distance gives network design excellent range and scalability. A 256-byte buffer per port supports stable data handling, making the module a strong fit for demanding motion control architectures.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTS-P01.2-D2-B1-S4-NN-NN-FW module is a servo control interface produced by Bosch Rexroth Indramat within the MTS Servo Control Modules series. It serves as the communication and processing node that links motion controllers, field devices, and drive amplifiers in automated lines, coordinating data exchange while occupying only a single slot in the control cabinet. The unit translates field-bus traffic, manages local digital I/O, and conditions power for logic circuits, making it a compact supervisor for multi-axis positioning tasks in packaging, printing, and material-handling machinery.
The housing is 22 mm wide, 145 mm high, and 295 mm deep, allowing dense rack placement. For digital sensing, the board provides 16 TTL inputs and an equal number of TTL outputs routed through ribbon connectors. Each communication channel uses a 256-byte circular buffer that decouples bus timing from processor cycle time. Internal logic is powered from the +5 V rail; it may draw up to 0.6 A and must see no more than 50 mV of ripple on that supply. The card also carries +12 V and −12 V rails where ripple is limited to 120 mV. Two RS422/485 ports permit differential links to remote drives or operator panels.
The module can address up to 4 Bt Bus devices on its local backbone, while an Interbus link can extend as far as 12.8 km across fiber or copper repeaters and be partitioned into 256 segments for distributed cell control. Host diagnostics and parameter downloads occur through 2 RS232 ports, separate from the motion network. A single configuration may register 512 users, providing individualized access rights without exhausting memory. These scaling features let the board coordinate dozens of axes and sensors from the same enclosure without altering its electrical footprint.
