MTS-P01.2-D2-B1-P1-S4-E1-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307544
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MTS-P01.2-D2-B1-P1-S4-E1-FW belongs to the MTS Servo Control Modules series and uses an ISA plug-in card format with ISA bus connectivity. It includes 16 TTL local inputs and outputs, supports up to 4 BT bus devices, and has 2 MB of PLC memory. The control module features RS232, RS422, and RS485 communication interfaces as well as Interbus and Profibus DP master ports.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTS-P01.2-D2-B1-P1-S4-E1-FW is a servo control module produced by Bosch Rexroth Indramat for the MTS Servo Control Modules series. Installed as an add-in controller inside a motion PC, it coordinates axis commands, fieldbus traffic, and local I/O so drive amplifiers and sensors can be synchronized during automated machining, packaging, or assembly tasks. The unit operates as an Interbus master through a female D-SUB 9 connector and supports four Bt bus devices so Indramat drives can be chained without extra gateways.
This controller occupies an ISA Plug-In Card slot and communicates with the host CPU across the ISA Bus, allowing deterministic data exchange with legacy industrial PCs. Its primary logic rail is rated at +5 VDC and the board draws only 0.6 A from that supply, while an auxiliary rail of +12 VDC powers on-board transceivers for the shared RS232/RS422/RS485 communication channel. Sixteen local TTL inputs and sixteen TTL outputs are provided for fast edge-triggered tasks, and two dedicated connectors expose the Serial Expansion header that offers two additional RS232 and two RS422/485 ports when extra sensors are needed.
A negative rail of -12 VDC is available for differential drivers and opto-isolators, and the board carries 4 PC/104 slots so compact daughter cards, such as digital encoders or high-speed counters, can be stacked without increasing rack width. The board includes 2 MB RAM for motion sequences and diagnostic buffers, while a Profibus interface acting as a DP Master links additional remote I/O panels. The 9-pin connectors share the same pinout as the Interbus port, simplifying cable management. Internal addressing permits up to four Bt devices to be polled in 250 µs cycles, and watchdog logic monitors the TTL I/O to guarantee deterministic response times during servo contouring.
Frequently Asked Questions about MTS-P01.2-D2-B1-P1-S4-E1-FW:
Q: What communication interfaces are available on the MTS-P01.2-D2-B1-P1-S4-E1-FW module?
A: The MTS-P01.2-D2-B1-P1-S4-E1-FW supports both RS232 and RS422/RS485 communication interfaces.
Q: How many local input and output channels are available on the MTS-P01.2-D2-B1-P1-S4-E1-FW?
A: This model provides 16 TTL local inputs and 16 TTL local outputs for flexible I/O integration.
Q: How much PLC memory is included with the MTS-P01.2-D2-B1-P1-S4-E1-FW?
A: The module features a 2 MB RAM PLC memory for processing and storage tasks.
Q: What card format does the MTS-P01.2-D2-B1-P1-S4-E1-FW use for installation?
A: The MTS-P01.2-D2-B1-P1-S4-E1-FW is designed as an ISA plug-in card for standard ISA bus systems.
Q: How many PC/104 slots are available on the MTS-P01.2-D2-B1-P1-S4-E1-FW module?
A: This module accommodates up to 4 PC/104 slots for expansion capabilities.
