MTS-P01.1-M1-B1-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911272171
The Bosch Rexroth Indramat MTS-P01.1-M1-B1-NN-NN-NN-FW is a servo control module in the MTS Servo Control Modules series. It features a 16-bit ISA bus interface, supports 4096 inputs and 4096 outputs, and has a main memory of 1 MB RAM. The module measures 124 mm in height, 17.5 mm in width, and 280 mm in depth.
Internal Product Review
The MTS-P01.1-M1-B1-NN-NN-NN-FW is an MTS servo control module with a 16-bit ISA bus interface and INTERBUS-S master functionality. Support for 4096 inputs and 4096 outputs plus 512 subscribers per configuration gives the module impressive flexibility in larger automation systems. A 7-segment diagnostic display and RS232 C diagnostic interface simplify commissioning and service, making this unit a strong choice for legacy servo architectures.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTS-P01.1-M1-B1-NN-NN-NN-FW is a servo control module produced by Bosch Rexroth Indramat for the MTS Servo Control Modules series. Installed in automation racks, the board acts as a network master that coordinates distributed I/O stations over INTERBUS while exchanging real-time data with higher-level motion controllers. By combining bus management and diagnostic functions on one plug-in card, it helps centralize control of servo drives and peripheral devices. This arrangement allows the host system to supervise field devices and drive-related signals from a single control point.
This module plugs into a backplane through a 16-bit ISA interface and can address up to 256 bus segments. It uses 1 MB RAM as main memory to store configuration tables and process images, allowing rapid access to the full 4096 inputs / 4096 outputs available on the remote rings. Parameter and fault codes appear on a 7-segment diagnostic display located on the front bezel. For internal expansion, a 50-way ribbon cable connects the card to the local bus so additional option modules can be stacked without occupying extra shelf width. The housing dimensions of 17.5 mm in width, 124 mm in height, and 280 mm in depth help the unit fit DIN rail carrier frames and maintain airflow between adjacent electronics. The card operates only in master mode, so all connected slaves receive cyclic polling from the control task.
The field network is managed by an INTERBUS-S Master controller that supports up to 512 subscribers per configuration and complies with the DIN E 19 258 transmission standard. Fault tracing is handled through an RS-232-C Interbus diagnostic port, while a separate onboard RS-232 interface links to a host computer for parameter access. These connections provide direct access to network status messages and operating data during startup and troubleshooting. A watchdog relay rated at 150 mA opens when the processor fails to refresh outputs within its allotted time slice, allowing external safety circuits to remove motor power. Width, height, and depth tolerances, along with the specified 50 °C ambient rating, help maintain module stability when it is mounted beside drives in sealed cabinets.
