Product Description

The MTC-P01.2-E2-A2-NN-NN-FW EP CNC controller manufactured by Bosch Rexroth comes with a diagnosis button. The diagnosis pertaining to its integrated axis processor gets activated in place of the CNC processor diagnosis as long as this diagnosis button is kept pressed. The CNC processor gets activated when the button is released. The graphical user interface of this product flashes a decimal number of three digits representing the error code and its corresponding system error message. The “019” error code indicates that the CNC battery is low and needs charging at the earliest. The “017” and “024” error codes denote that the data memory in the module is invalid.

The device works in unison with an SPS controller from the same manufacturer to offer the solutions rendered by the machine tool controller. This product can be connected with a minimum of eight drives and a maximum of thirty-two drives. Only four of these drives are capable of interpolating with one another. The unit makes use of fiber optics to communicate with these drives. The fiber optics cable connecting the transmitter and receiver should not have a tightening torque of more than 0.8Nm. The controller can be integrated with a PLC.

The module incorporates M, S, T, Q, and E auxiliary functions. The status messages of the product are displayed along with a number ranging from 151 to 200. The device allows PLC controlled and numerically controlled tools to be operated the same way. Its tool management is activated using the A00.052 Tool management system parameter. The NC packages and setup lists are saved in the unit via the storage function. The tool list of the controller can be created, saved, and modified while machining takes place, by means of the PC user interface. This MTC-P01.2-E2-A2-NN-NN-FW EP controller can be shipped through a reputed logistics team with a warranty period of one year.