Product Description:

The MTC-R01.1-M1-NN-FW is a CNC controller module produced by Bosch Rexroth Indramat for the MTC200 CNC Modules series. It fits into multi-axis machine tools and production cells, where it coordinates motion sequences and I/O processing to streamline automated cutting, drilling, or forming operations. The unit manages position loops and sequencing logic for several drives, allowing the control platform to be expanded without enlarging the main rack.

This module runs from a nominal input of 24 VDC and, at full computational load, draws up to 510 mA. Heat generated by the processor and bus interface is limited to 14.3 W, a value low enough for convection cooling inside typical cabinets. The internal DC rails exhibit a ripple of 4 Vpp, so peripheral devices must tolerate that level of voltage variation. Motion resources extend to 8 axes, giving one module enough capacity for a complete lathe or a midsize machining center. Electrical terminations accept 1.5 mm² conductors, and installation is onto a TS 35 × 27 × 15 DIN rail, keeping wiring compact. Continuous operation is supported at 75% non-condensing humidity, while the housing meets the IP 20 ingress limit, so it must be mounted inside a protected enclosure.

Mechanical integration is simplified by a footprint of 41.5 × 192 × 152 mm and a mass of only 1.00 kg, reducing strain on backplane connectors and allowing dense stacking with other automation cards. Reliable service is maintained up to an ambient temperature of 55 °C. Storage below −25 °C should be avoided to protect solder joints, and long-term warehousing is allowed up to 70 °C. The electronics remain within thermal margins when the machine operates at elevations up to 1500 m. Shock-free transport is permitted up to 3500 m, so the module can be moved to high-altitude facilities without climate-controlled packaging.