MTC-P01.2-E1-A2-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911281971
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MTC-P01.2-E1-A2-NN-NN-FW is part of the MTC200 CNC Modules series and uses an ISA plug-in card format. This module comes with a SERCOS fiber optics drive interface and can support up to 8 integrated drives. It features one installed axis module, two empty axis slots, and has dimensions of 17.5 x 124 x 280 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MTC-P01.2-E1-A2-NN-NN-FW is a CNC processor card manufactured by Bosch Rexroth Indramat for the MTC200 CNC Modules series. Installed in a controller rack, the module forms the command layer between a machine tool PC and the drive system, generating position loops and sequence logic for automated cutting, forming, or assembly equipment. By combining axis interpolation and programmable I/O handling on one board, it shortens cycle times and reduces the overall cabinet footprint in industrial automation cells that require coordinated motion and logic control.
The board uses an ISA plug-in card format for direct insertion into standard backplanes, and a 1-digit 7-segment diagnostic display provides immediate status codes during startup and service. Overall dimensions are 17.5 × 124 × 280 mm, so the card occupies a single slot while still leaving room for cooling airflow. Motion commands reach the drives through a SERCOS fiber-optic interface, and one axis module is installed while two axis slots remain open, with a maximum of three axis modules supported for this version. Internally, the controller can supervise up to 8 drives when the remaining axis positions are populated. Program execution and buffering use 1 MB RAM, and volatile data are retained for 8 ms after a power failure so the PLC can respond before shutdown.
An NC-ready output supplies 24 V at up to 150 mA to signal downstream hardware that the control loop is active. Fiber links tolerate channel losses up to 12.5 dB, which supports longer routing paths through drag chains and other extended cable runs. The card exchanges cyclic data with the Indramat local bus and distributes those signals over a 50-way ribbon cable to the SPS section, eliminating the need for discrete wiring. This arrangement keeps communication between the CNC section and the SPS section inside the rack rather than relying on separate point-to-point cabinet harnesses.
Frequently Asked Questions about MTC-P01.2-E1-A2-NN-NN-FW:
Q: How many drives can the MTC-P01.2-E1-A2-NN-NN-FW support?
A: The MTC-P01.2-E1-A2-NN-NN-FW can support up to 8 drives using its integrated drive capacity.
Q: What type of drive interface does the MTC-P01.2-E1-A2-NN-NN-FW use?
A: This module uses a SERCOS fiber optics drive interface for high-speed communication.
Q: What is the bus format of the MTC-P01.2-E1-A2-NN-NN-FW module?
A: The MTC-P01.2-E1-A2-NN-NN-FW features an ISA plug-in card bus format as its connection method.
Q: What type of diagnosis display is available on the MTC-P01.2-E1-A2-NN-NN-FW?
A: This model includes a 1-digit 7-segment diagnostic display for error and status indication.
Q: How many axis modules are installed and how many empty slots are available in the MTC-P01.2-E1-A2-NN-NN-FW?
A: It comes with one installed axis module and offers two additional empty slots for expansion.
