MST530E-0010-FT-N0RN-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309095
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MST530E-0010-FT-N0RN-NNNN Synchronous Torque Motor comes equipped with Winding type 0010 and cools down through the use of Liquid Cooling. The motor's frame length is E, which is correspondent to the amount of torque (The higher the length, the more torque. The IndraDyn T motors are always fitted with a stator-cooling jacket for operation with liquid cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MST530E-0010-FT-N0RN-NNNN is a synchronous motor designed by Bosch Rexroth IndraDyn. It is a static motor with a stator mass of 63 kg. It has 35 pole pairs, which means the total of 70 poles is split equally between the north and south poles. The motor has a discharge capacity of 23.0 nF. The motor is torque synchronous, thus has a high rated torque of 2100 Nm and a rated current of 64 A at a rated power of 22 kW. The torque constant of the motor is 32.80 Nm/A, while the voltage constant is 2.090 V/min.
The MST530E-0010-FT-N0RN-NNN motor has a size of 530 mm and a frame length of D. Unlike some models, this variant does not include any motor encoder. It has a cross-section wire of 16 mm2. The motor has a rated velocity of 100/ min; however, in peak conditions, it can have a maximum velocity of 200/ min. The motor has a key specification, which is its liquid cooling mode, ensuring the quality of the motor and maintaining optimal temperature. The coolant duct has a capacity of 1.50 liters, with a required coolant flow rate of 9.5 liters per minute. The coolant inlet temperature is maintained between 10 degrees C and 40 degrees C, and the maximum inlet pressure is 3 bar, ensuring a stable cooling process.
The motor is also thermally encapsulated, meaning it is designed for enhanced heat resistance and durability. The MST530E-0010-FT-N0RN-NNNN motor has a winding inductance of 7.5 mH and a winding resistance of 0.20 ohms at 20 degrees C. The motor has a maximum allowed installation altitude of about 3000 m in case of stators connecting to the terminal box, while this value increases to 5000 m in case of connection cable.
