MST210A-0027-FT-N0CN-D303
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911383920
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MST210A-0027-FT-N0CN-D303 Synchronous Torque Motor comes equipped with Winding type 0027 and cools down through the use of Liquid Cooling. The motor's frame length is A, which is correspondent to the amount of torque (The higher the length, the more torque. The IndraDyn T motors are always fitted with a stator-cooling jacket for operation with liquid cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MST210A-0027-FT-N0CN-D303 has a rated speed of 270 rpm with a high torque of 50 Nm. At that rated speed and load with rated torque, this synchronous torque motor has a rated power consumption of 1.4 kW and withdraws a rated current of 7 A. The machine has a peak velocity of 600 rpm, and the maximum torque is 100 Nm. The power wire cross-section area of the motor is 1 mm2 according to DIN VDE 0298-4 and laying type B2 according to DIN IEC 60204-1. The power wire cross-section area for the motor is calculated with the conversion factor for Rexroth cables at 40 degrees C ambient temperature.
This machine MST210A-0027-FT-N0CN-D303 has cable strands conducted design through the stator end. The motor has thermal encapsulation and the thermal time constant is 2.4 min which is defined by the cooling type used. The winding resistance and the discharge capacity of the short-circuited power connections U, V, W against the motor's component is 11 ohms, and 4.8 nF respectively. The particular model of the motor has 20 pole pairs and the winding inductivity between two strands is 53.3 mH.
The stator mass of the machine without holding brakes and encoder is 7.2 kg, and the cooling mode is liquid with the necessary coolant flow at Pv of 6 I per min. The volume of the coolant duct of the liquid cooling is 0.18 I with a power dissipation loss of 1.2 kW. The voltage constant of the MST210A-0027-FT-N0CN-D303 is 0.51 V per minute at 20 degrees centigrade, and the maximum root-mean-square current consumption is 25 A. In transportation, the motor must maintain an environment with an air humidity of 75%.
