MST160E-0050-FT-N0CN-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318540
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MST160E-0050-FT-N0CN-NNNN Synchronous Torque Motor comes equipped with Winding type 0050 and cools down through the use of Liquid Cooling. The motor's frame length is E, which is correspondent to the amount of torque (The higher the length, the more torque. The IndraDyn T motors are always fitted with a stator-cooling jacket for operation with liquid cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MST160E-0050-FT-N0CN-NNNN is an optimized and reliable motor stator from Bosch Rexroth Indramat. This stator is designed to meet the high torque demands of production and processing machines without consuming too much energy or generating extreme heat. The stator is equipped with three-phase winding, while the rotor used features permanent magnets that are responsible for the excitation of the motor. Apart from the winding installation into this motor stator, it also contains a water-cooling jacket that keeps the operating temperature in the motor at a minimum. The liquid cooling system used in this motor is significantly more efficient; it is also responsible for the relatively low noise pressure of the motor compared to conventional air-cooled motor designs.
Despite the high toque generated by motors featuring the MST160E-0050-FT-N0CN-NNNN stator, it produces a very low residual ripple. Any controller to be used with this stator must be programmed appropriately to ensure that the motor is operated as expected. The rated current required by this motor stator for optimum operation is about 19.5 amperes; at this input current, the motor produces a rated torque of 105-newton meters and a rated power output as high as 5.5 kilowatts. The rated velocity measured for motors featuring this stator is about 500 revolutions per minute.
For operators that require a higher torque output, it is possible to supply this product with a current as high as 66 amperes; at this peak current, the motor can generate an impressive torque output of about 270-newton meters while doubling its velocity to reach a speed of about 1000 revolutions per minute. The total weight measured for this motor stator is about 13.9 kilograms.
