MST130C-0050-FT-N0CN-D303
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332860
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MST130C-0050-FT-N0CN-D303 Synchronous Torque Motor comes equipped with Winding type 0050 and cools down through the use of Liquid Cooling. The motor's frame length is C, which is correspondent to the amount of torque (The higher the length, the more torque. The IndraDyn T motors are always fitted with a stator-cooling jacket for operation with liquid cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MST130C-0050-FT-N0CN-D303 is a torque motor part of the MST synchronous series with a winding designation number of 0050 that translates to winding resistance of 6.3 ohms. This ensures high power delivery as this motor comes with a power rating of 1.1 kW and also comes with a winding inductance of 42 mH which makes sure that the supply to the winding is always filtered and is able to suppress high-frequency noise within the supply line.
This motor comes with a speed rating of 500 rotations per minute which can go all the way up to 1200 rpm. Along with high speeds, this motor can also provide a respectable 25 Nm rated nominal torque which can go all the way up to 40 Nm at the maximum speed. This motor comes with a torque constant ratio of 3.3 Nm at 1-ampere current draw and has a voltage constant ratio of 0.4 volts for every rpm of speed that this motor attains when within an operational temperature of 20 degrees Celsius.
This motor is AC operated and requires around 279 volts AC nominal to operate and can draw up to 7.5 Amperes of current under normal duty mode, while in heavy-duty mode, this torque motor can draw a respectable 12 Amperes of current. Make sure that this motor is paired up with an efficient supply module that is compatible with this motor. This motor can be controlled with various PLC from different manufacturers as long as they are compatible with the communication protocol of this motor. An I/O module and communication interface can also be attached to this motor in order to control it over a Network system.
