MST130A-0200-FT-N0CN-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911316452
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MST130A-0200-FT-N0CN-NNNN Synchronous Torque Motor comes equipped with Winding type 0200 and cools down through the use of Liquid Cooling. The motor's frame length is A, which is correspondent to the amount of torque (The higher the length, the more torque. The IndraDyn T motors are always fitted with a stator-cooling jacket for operation with liquid cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MST130A-0200-FT-N0CN-NNNN has a rated velocity of 2000 rpm, and the maximum velocity is 4000 rpm. This variant has no encoder and the electrical connection is line conducted through the stator end. The power wire cross section is 1 mm2, and the voltage constant at 20 degrees centigrade is 0.105 V per 1000 rpm. So, the total voltage constant of this variant is 0.21 V which is the root-mean-square value of the induced motor voltage. The discharge capacity of the component is 2.2 nF, and the stator mass is 2.4 kg.
The total number of pole pairs is 10, and the rated current of this model is 7.5 A. The rated torque of this motor is 9 Nm whereas the winding inductivity is 19.4 mH. Bosch Rexroth Indramat recommends class 3K4 environmental conditions for the continuous use of synchronous torque motors. The cooling is done through liquid cooling, and the encapsulation is thermo with an aluminum cooling jacket. The motor design MST130A-0200-FT-N0CN-NNN has two connection threads on the stator housing for connecting the liquid coolant.
This variant MST130A-0200-FT-N0CN-NNN of synchronous torque motors has no other design. The liquid cooling has a power loss of 0.5 kW, and the coolant inlet temperature is 10 C to 40 C. The pressure loss at Q min of the coolant is 0.1 bar, and the volume of the coolant duct is 0.04 I. The maximum allowed inlet pressure is 3 bar, and the necessary coolant flow at Pv is 0.7 I per minute. The winding resistance of the machine is 2.5 ohms at 20 degrees centigrade, and it is measured as winding resistance between two strands. The thermal time constant is 2 minutes and the torque constant is 1.2 Nm/A.
