Product Description

The MSK100B-0200-NN-S2-AG0-RSNN Bosch Rexroth synchronous servomotor has a black RAL 9005 housing. The motor houses a plain output shaft with a backlash-free and force-fit shaft-hub connection. The product has a B5 frame size according to EN 60034-7 specifications. The device also has R-type concentricity and alignment tolerance. The unit installation can be done in any orientation. It supports natural convection cooling mode. This motor should never be operated without a drive controller. This product is equipped with a radial shaft sealing ring designed in compliance with DIN 3760 – Version A specifications on its shaft. The device has IP 65 protection class on the flange side.

The motor is subject to radial and axial forces on its shaft and bearings during operation. The product experiences a premature failure of its bearings due to the reduction of the grease lifetime. The device must never have liquid accumulation around the output shaft. The unit is likely to have a change in position of the flange end of the shaft by 0.6mm with respect to the housing due to thermal effects. Its shaft has a very quiet running action. The motor is supposed to be commissioned only in non-explosive environments. This MSK100B-0200-NN-S2-AG0-RSNN servomotor is available with a year’s Wake Industrial warranty.

The product has a KTY84-130 temperature sensor in its stator. The device has a type plate attached to its housing containing type designation as well as technical information. The unit stores its type designation in the encoder data memory. It is designed to be lifted using appropriate equipment such as lifting sling belts. The motor handling has to be done by taking care to avoid damage to its drive shaft and flange. This product is meant to be repaired only after making sure that its parts are not under residual voltage. This motor is delivered through reputed freight carriers with a worldwide network.