Product Description

The MSK060C-0300-NN-M3-UG0-NNNN is a servo motor with standard housing design. It is part of the MSK product line from Bosch Rexroth. MSK motors are designed to be used as rotary main and servo drive motors. Typical applications for drive systems that include MSK motors are metal-forming machines, packaging machines and machine tools. The motors are used with drive controllers. Dangerous motor movements can occur due to any of the following reasons: improper wiring / cabling, operator errors, defective components, firmware errors and sensor malfunction. These errors can occur at any time after motor commissioning. Dangerous and undesirable motor movements pose a risk of serious injury or equipment damage. Therefore a risk assessment must be performed for the machine installation. To avoid accidents it is important to use safety fences and guards when entering the machine’s range of motion.

The MSK060C-0300-NN-M3-UG0-NNNN supports several features such as capacitive encoder rated for 16 signal periods, plain shaft with sealing ring, and 240-degree rotatable power / feedback connectors. The cooling method for which the MSK060C-0300-NN-M3-UG0-NNNN is designed is natural convection. MSK motors designed for surface cooling are also available. The optimal working temperature range is 0 to 40 degrees Celsius. Motor operation outside this range can lead to malfunction and even motor failure. The housing of the MSK060C-0300-NN- M3-UG0-NNNN has an environmental protection rating of IP65. Thermal class of the MSK060C-0300-NN-M3-UG0-NNNN is F as per EN 60034-1. Resistance of the motor winding at 20 degrees Celsius is 3.1 Ohms and the winding inductance is 2.1 millihenry. The MSK060C-0300-NN-M3-UG0-NNNN does not feature a holding brake. Bosch recommends use of spare parts that are approved and specified in the motor documentation.