Product Description:

The MSK101E-0450-FN-S1-AG2-NNNN is an IndraDyn S synchronous servomotor built by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. As a standard-design rotary actuator, it supplies controlled torque and speed to automated machinery, using drive feedback to align shaft position with commanded values in packaging lines, gantry axes, and similar motion tasks. It is suited for servo applications that require repeatable motion, stable velocity control, and accurate response to changing load conditions. The A-side power connector directs the power leads toward the drive cabinet, which can simplify cable routing in compact machine layouts.

The motor uses liquid cooling, so coolant circulates through the housing to remove heat and stabilize winding temperature during continuous duty. Its 0450 winding code matches the electrical data expected by compatible MSK drive amplifiers, helping the drive regulate current and torque correctly. Feedback is generated through the Hiperface interface with 128 signal periods per revolution, allowing the controller to interpolate fine position increments for closed-loop motion. The encoder provides single-turn absolute data, which gives the controller a unique position within one full revolution. An electrically released holding brake supplies 70 Nm of static torque to hold the axis when power is removed.

The encoder uses optical scanning to produce clean incremental and absolute signals with good resistance to electrical noise in the feedback path. The motor has a plain shaft, which is suitable for clamp or shrink couplings without keyways and supports a direct mechanical connection to the driven load. A protection rating of IP65 helps keep dust and low-pressure water jets away from the housing, and the permitted ambient temperature range is 0 to 40 °C. Thermal insulation class 155 supports elevated winding temperatures during operation, and the standard housing resists common industrial fluids used around automated equipment.