MSK101E-0300-FN-S2-AG2-RNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911325110
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
11 Seconds
The Bosch Rexroth Indramat MSK101E-0300-FN-S2-AG2-RNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features liquid cooling, a plain shaft, and a holding brake with 70 Nm of electrically-released torque. The motor uses EnDat2.1 optical singleturn encoder technology with a resolution of 2048 signal periods.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101E-0300-FN-S2-AG2-RNNN servomotor is produced by Bosch Rexroth Indramat and belongs to the MSK IndraDyn S Synchronous Motors series. It is an electromechanical actuator intended for industrial automation tasks where tightly controlled torque and rapid feedback are needed to position machine axes, packaging heads, or transfer stations. Its design pairs with IndraDrive power stages so that the drive can command high-resolution motion while the motor’s internal encoder returns precise position data to close the control loop.
Heat removal is handled by an integrated liquid cooling circuit that mates with the FN cooling plate. Continuous coolant flow keeps the stator below permissible temperature even during peak power cycles. Rotor position is captured by an EnDat2.1 optical encoder that produces 2048 signal periods per revolution, and this resolution supports very precise positioning. The encoder is a single-turn type, supplying the absolute angle within one mechanical turn without multi-turn counting. For load holding or safe standstill, an electrically released brake supplies 70 Nm of static torque, allowing the axis to stay locked when the machine is de-energized.
The motor has a motor size 101 housing and length code E, giving it a compact body while still allowing space for the active winding section. The shaft is a plain shaft, so it is intended for external couplings that do not require a key. The electromagnetic layout uses the 0300 winding code, which matches the electrical characteristics expected by compatible drive settings for high-current operation. All power conductors exit through the power connector on the A-side, which helps simplify cable routing when multiple axes are installed close together. The stator lamination stack is built with increased concentricity to help reduce cogging during rotation.
Frequently Asked Questions about MSK101E-0300-FN-S2-AG2-RNNN:
Q: What type of shaft does the MSK101E-0300-FN-S2-AG2-RNNN motor have?
A: This model features a plain shaft configuration for direct mechanical coupling.
Q: What cooling method is used with the MSK101E-0300-FN-S2-AG2-RNNN?
A: The motor uses liquid cooling for efficient heat dissipation during operation.
Q: What type of encoder technology does the MSK101E-0300-FN-S2-AG2-RNNN motor provide?
A: It is equipped with an optical singleturn encoder that offers 2048 signal periods of resolution and uses the EnDat2.1 interface.
Q: What kind of holding brake is included on the MSK101E-0300-FN-S2-AG2-RNNN and what is its torque?
A: The holding brake is electrically released and provides a holding torque of 70 Nm.
Q: Where is the power connector located on the MSK101E-0300-FN-S2-AG2-RNNN motor?
A: The power connection for this model is configured on the A-side of the motor.
