Product Description:

The MSK101E-0200-NN-S2-BG0-RNNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts drive controller commands into precise rotary motion for positioning tasks on packaging lines, metal-cutting centers, and automated transfer stations. The housing is sealed to IP65, which helps keep dust and low-pressure water jets away from internal components on factory floors. Its increased concentricity design reduces runout at the output face, supporting smooth rotation during rapid acceleration. That makes it suitable for axes that need repeatable start-stop motion, stable speed regulation, and compact installation within automated equipment.

This motor relies on natural convection to move heat from the stator to the housing, so no external fan or liquid circuit is required. Position data are delivered by an optical encoder that communicates through the EnDat 2.1 digital interface and resolves movement into 2048 signal periods, supporting tight velocity loops in servo drives. The encoder is a single-turn unit, so one shaft revolution is tracked before the position count repeats and the axis must reference after power-up. Torque is transferred through a plain shaft, which simplifies coupling alignment. Power and ground connections are located on the B-side of the housing, which can simplify cable routing when the machine layout favors one cable exit direction. Motor size 101 with E length provides an extended active stack for higher continuous torque while keeping the diameter fixed.

The unit is supplied without a holding brake, so static load retention must be handled by the machine mechanics or the energized drive. Continuous operation is allowed in ambient temperatures from 0 to 40 °C, which is consistent with insulation class 155 for thermal durability. Winding code 0200 indicates the electrical resistance and inductance set expected by a matching IndraDrive controller.