Product Description:

The MSK101E-0200-NN-S1-BG3-NNNN is a synchronous servomotor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts drive current into precise rotary motion and supplies closed-loop positioning for axes used in packaging, printing, and material-handling equipment. Integrated feedback and a compact permanent-magnet rotor allow the motor to couple directly to the load, while its stator windings interface with IndraDrive power stages for coordinated industrial automation. The motor is intended for applications that require repeatable speed and position control through changing load conditions and frequent motion cycles.

Heat is removed by natural convection, so the housing must be mounted where ambient air can circulate freely. Position feedback is delivered by an optical encoder that generates 128 signal periods per revolution, and this data is exchanged with the controller through the Hiperface protocol. Because the encoder is a single-turn device, it provides absolute position over one rotation and relies on software for multi-turn counting. Motor size 101 sets the flange pattern and shaft height used by medium-power MSK units on modular machinery. In closed-loop operation, this feedback path lets the drive correct speed and position errors quickly during acceleration and settling.

Power conductors exit on the B-side, which can simplify cabinet layouts that separate power and feedback wiring. A plain shaft is fitted to accept rigid couplings or gears without keyway distortion. The electrically released brake produces 120 Nm of static torque, securing vertical or indexing loads whenever the drive is disabled. Winding code 0200 indicates the stator winding selected for nominal voltage compatibility with standard IndraDrive converters. This arrangement suits axes that need standstill holding together with a shaft prepared for direct coupling to the driven load.