Product Description:

The MSK101E-0200-NN-S1-AG0-NNNN is an IndraDyn S synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It provides precise torque and position feedback for automated axes in packaging cells, printing lines, and material-handling gantries. An integrated encoder and stator winding support closed-loop motion so the axis can respond accurately during positioning, speed control, and repeated indexing cycles. This operating behavior is useful where commanded motion must remain consistent during frequent starts, stops, and reversals.

Cooling uses natural convection, so the housing relies on ambient air instead of forced ventilation. That arrangement avoids the need for an attached fan and keeps airflow demands at the machine low. The motor uses a standard design and follows the MSK mounting pattern, which supports predictable installation geometry. Position data are transmitted through the Hiperface interface by an optical measuring system with 128 signal periods per revolution. The single-turn encoder reports absolute position within one mechanical turn, which suits axes that reference at startup and do not need multi-turn storage.

The rotor has a plain shaft for use with clamping elements or other friction-fit couplings, and the power leads exit on the A-side to keep cable routing consistent. This cable outlet position can help when the motor is installed in compact machine frames or near guarded tooling. Winding code 0200 is matched to the electrical characteristics expected by compatible drive amplifiers. The motor uses frame size 101 with length E, which increases active material for higher continuous output while keeping the same flange pattern. The unit is supplied without a holding brake, so any static load must be held by drive torque or an external mechanism.