MSK101E-0200-NN-M3-AG2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911389576
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
27 Seconds
The Bosch Rexroth Indramat MSK101E-0200-NN-M3-AG2-NNNN is an IndraDyn S Synchronous Servomotor from the MSK IndraDyn S Synchronous Motors series. It features natural convection cooling and a plain shaft, with a protection rating of IP65. The motor is equipped with a multiturn absolute Hiperface encoder using capacitive technology and has a holding brake torque of 70 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101E-0200-NN-M3-AG2-NNNN is an IndraDyn S synchronous servomotor developed by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Designed for use with compatible drive controllers, the unit converts three-phase power into controlled rotary motion that positions tooling, conveyors, or pick-and-place heads with high accuracy. A multi-turn absolute encoder feeds precise rotor angle data to the control loop so that commanded velocity and torque profiles are maintained across the working range used in automated production equipment. This feedback arrangement supports repeatable axis behavior during indexing, transfer, and synchronized motion tasks.
In regular operation, the motor uses natural convection for cooling, so no external blowers or liquid circuits are required. Its electrically released holding brake locks the shaft with 70 Nm of static torque, allowing gravity-loaded axes to remain secure when the drive is disabled. An enclosure rating of IP65 protects internal components from dust and water jets, which supports installation on exposed machine surfaces. Motion feedback exits the housing through a Hiperface interface that carries position and diagnostic data from the capacitive scanning system. This signal path helps the connected drive maintain stable commutation and accurate position tracking during normal machine motion.
The motor uses the 101 frame size and length code E, and the standard design variant keeps mounting surfaces compatible with MSK accessory hardware. The plain shaft couples directly to zero-backlash hubs, while the power connector is located on the A-side for orderly cable routing in compact machine layouts. Insulation class 155 permits continuous service until winding temperatures approach the Class F limit, and ambient operation is permitted from 0 to 40 °C without derating. Winding code 0200 matches the motor's electrical characteristics and supports smooth, sinusoidally commutated torque throughout the speed range.
Frequently Asked Questions about MSK101E-0200-NN-M3-AG2-NNNN:
Q: What shaft type does the MSK101E-0200-NN-M3-AG2-NNNN motor have?
A: The MSK101E-0200-NN-M3-AG2-NNNN is equipped with a plain shaft design for direct coupling to mechanical components.
Q: What encoder technology is used in the MSK101E-0200-NN-M3-AG2-NNNN?
A: This motor utilizes a Hiperface encoder interface with capacitive multiturn absolute technology for high-resolution feedback.
Q: What is the holding brake torque on the MSK101E-0200-NN-M3-AG2-NNNN motor?
A: The holding brake in this model is electrically-released and provides a torque of 70 Nm.
Q: What is the protection rating of the MSK101E-0200-NN-M3-AG2-NNNN servomotor?
A: The MSK101E-0200-NN-M3-AG2-NNNN is rated for protection class IP65, shielding it from dust and low-pressure water jets.
Q: What is the allowable operating temperature range for the MSK101E-0200-NN-M3-AG2-NNNN motor?
A: Operation for this motor is supported in ambient temperatures ranging from 0 to 40°C.
