Product Description:

The MSK101E-0200-NN-M2-LG0-RNNN is a servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It converts power from a compatible IndraDrive amplifier into precise rotary motion for packaging machines, pick-and-place gantries, and other automated axes that require accurate speed and position control. The sealed housing mounts directly to machine frames, while the integrated feedback circuit returns rotor position data to the controller for closed-loop operation. This arrangement supports repeatable starts, stops, and synchronized motion during normal production.

Cooling is provided by natural convection, so heat dissipates through the housing without external fans. A design emphasis on improved concentricity helps reduce radial runout at the shaft and improves alignment with couplings, pulleys, or gear stages. Position data are transmitted through the EnDat2.1 interface, and the encoder supplies 2048 signal periods per revolution before interpolation by the drive. The feedback device is optical and uses multi-turn absolute position tracking, which allows the controller to retain shaft position after power loss without a homing cycle. The motor uses size 101 with E length, winding code 0200, no holding brake, and a left-side power connector.

The housing has an IP65 rating that helps protect internal parts from dust and low-pressure water jets. Continuous operation is permitted from 0 to 40 °C, which fits typical industrial ambient conditions. A plain shaft simplifies connection to external transmission elements, and insulation class 155 supports elevated winding temperatures during dynamic duty. Because the motor is supplied without a holding brake, any static load must be held by the drive or by external machine hardware. It is commonly applied on transfer, indexing, and handling axes that cycle frequently.