MSK101E-0200-NN-M1-BG2-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911312548
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
11 Seconds
The Bosch Rexroth Indramat MSK101E-0200-NN-M1-BG2-NNNN is part of the MSK IndraDyn S Synchronous Motors series and is a standard IndraDyn S Synchronous Servomotor. It uses natural convection cooling and comes equipped with a multiturn absolute optical encoder with Hiperface interface and 128 signal periods resolution. The motor includes an electrically released holding brake with a torque of 70 Nm and features a plain shaft and B-side power connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101E-0200-NN-M1-BG2-NNNN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It is intended for closed-loop speed and position control in assembly lines, handling units, and packaging stations where repeatability and responsive torque are required. The motor interfaces with Rexroth drive controllers to form a complete servo axis that responds to motion commands and feedback signals in real time. This arrangement supports precise acceleration, deceleration, and stable motion control during repetitive machine cycles.
The motor uses natural convection, so no external blower or liquid circuit is required. Stator heat is transferred to the surrounding air through fins on the standard housing, so installation clearance around the frame must be maintained. Position data is delivered over the Hiperface interface, and the integrated optical feedback system provides 128 signal periods per revolution. Because the sensing principle is optical, it offers high noise immunity and maintains accuracy even as magnetic fields fluctuate within the cabinet. The motor uses a multiturn absolute encoder, so the controller can recover position after restart without a homing cycle.
The electrically released holding brake supplies 70 Nm of static torque, allowing vertical loads or indexing tables to remain locked when the drive is disabled. Mechanical transmission is handled by a plain shaft that accepts shrink-fit or keyed couplings without the extra mass of a spline. Power conductors connect on the B-side, which supports cable routing along the machine frame rather than toward the drive end. The electromagnetic characteristics correspond to winding code 0200, which balances current demand and back-EMF for medium-voltage drive platforms in the 101 frame size.
Frequently Asked Questions about MSK101E-0200-NN-M1-BG2-NNNN:
Q: What type of cooling method is used in the MSK101E-0200-NN-M1-BG2-NNNN servo motor?
A: The MSK101E-0200-NN-M1-BG2-NNNN motor uses natural convection for cooling, operating effectively without the need for forced air or water-cooling.
Q: What type of encoder and resolution does the MSK101E-0200-NN-M1-BG2-NNNN motor provide?
A: This model features a multiturn absolute optical encoder with a resolution of 128 signal periods for precise feedback.
Q: What is the holding brake specification for the MSK101E-0200-NN-M1-BG2-NNNN motor?
A: The holding brake on this motor is electrically released and delivers a holding torque of 70 Nm.
Q: Where is the power connector located on the MSK101E-0200-NN-M1-BG2-NNNN motor?
A: The power connector is positioned on the B-side of the MSK101E-0200-NN-M1-BG2-NNNN motor housing.
Q: What type of shaft does the MSK101E-0200-NN-M1-BG2-NNNN motor use?
A: This servo motor is equipped with a plain shaft, which accommodates a wide variety of couplings.
