Product Description:

The MSK101E-0200-NN-M1-AP2-NNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat and positioned in the MSK IndraDyn S Synchronous Motors series. It uses winding code 0200, motor size 101, and length E, which set the active stack dimensions and the electrical behavior expected by a matching drive controller. In a multi-axis automation cell, the unit delivers controllable torque for feed drives, pick-and-place heads, or rotary tables, and it interfaces directly with IndraDrive controllers through integrated feedback and a power connector on the A-side for compact machine wiring where accurate position response and stable speed regulation are required during repeated cycles.

This model is assigned to the FN cooling category and removes heat through natural convection, which eliminates the need for an external blower in low to moderate duty cycles. A sealed aluminum housing rated IP65 helps keep dust and water jets away from internal components, while the electrically released holding brake supplies 70 Nm of static torque during power-off states. Position data are carried over a Hiperface interface, and the optical encoder generates 128 signal periods per revolution while storing position as a multiturn absolute value. The optical measuring principle avoids magnetic drift and maintains resolution over the full speed range, which supports consistent feedback quality during both slow positioning moves and higher-speed travel.

The motor operates in ambient temperatures from 0–40 °C and uses an insulation system rated to class 155, supporting continuous service with appropriate thermal margin in the windings. The output is a shaft with keyway, which provides positive torque transfer to pulleys or couplings and supports repeatable alignment in indexing systems. This shaft style is often preferred on transfer and indexing axes where repeated starts, stops, and load changes can place more stress on the mechanical connection than a friction-fit hub alone can comfortably handle.