Product Description:

The MSK101E-0200-NN-M1-AK0-NN02 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MSK IndraDyn S Synchronous Motors series. In automated assembly lines or material-handling gantries, it converts drive current into precisely regulated torque and speed. That controlled output helps indexing tables, pick-and-place arms, and similar axes reach commanded positions with repeatable accuracy. Because servo response is matched continuously to the command signal, the motor can support accurate motion profiles during acceleration, steady travel, and stopping.

Heat is removed solely by natural convection, eliminating fans and keeping enclosure dimensions unchanged. Position feedback relies on a Hiperface optical encoder, and its code disk supplies 128 signal periods per revolution. The bidirectional serial link identified as Hiperface transmits position and motor data to the drive. Because the encoder is a multiturn absolute device, up to 4096 mechanical turns are tracked internally. Optical scanning provides high immunity to magnetic interference. This feedback method supports stable motion control in installations where nearby electrical equipment could interfere with less robust sensing technologies. The motor is delivered without a holding brake, so any static load must be secured by the external drive or by mechanical locks.

With frame size 101 and length designation E, the stator winding referenced by 0200 sets the voltage constant and rated current for this model. Power terminals exit on the A-side, which can simplify cable routing when the motor is mounted with its connector toward the drive chain. The housing is rated IP65, and continuous operation is permitted at 0–40 °C in indoor installations. Insulation class 155 allows elevated winding temperatures before thermal aging accelerates. This arrangement is useful on enclosed axes where external cooling hardware would add space and complexity.