Product Description:

The MSK101E-0200-FN-S1-AG2-NNNN is an IndraDyn S synchronous servo motor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It delivers closed-loop rotational power to positioning and feed axes that require precise control of speed and torque in automated machinery. The motor uses a standard mechanical design, has the E length code within the 101 frame class, and routes power through an A-side connector for straightforward cable routing. Because the unit uses the FN cooling arrangement, it requires active thermal management so the motor can remain within its continuous-duty temperature range during sustained operation.

Thermal energy is removed through liquid cooling, which circulates coolant around the stator jacket to keep winding temperatures stable during high-load cycles. Position feedback is transmitted through the Hiperface interface, allowing the drive to detect absolute rotor position immediately after power-up and maintain accurate closed-loop control during synchronized motion. The encoder provides 128 signal periods per revolution, supporting fine position resolution for coordinated multi-axis movement. For load holding and stop functions, the motor uses an electrically released brake with a holding torque of 70 Nm, so the shaft can remain secured when control power is removed.

Encoder sensing is based on optical scanning and uses a single-turn arrangement, so the feedback system reports one absolute position value for each mechanical revolution. Mechanical output is transferred through a plain shaft, which supports coupling to pulleys, gearboxes, or other drive components where smooth torque transmission is required. The winding code 0200 identifies the electrical winding variant used in this motor and matches it with compatible drive modules. This combination of feedback, shaft style, and winding selection supports stable motion behavior in axes that must accelerate, position, and reverse direction with repeatable control.