Product Description:

The MSK101E-0200-FN-S1-AG0-NNNN is a servo motor manufactured by Bosch Rexroth Indramat and belongs to the MSK IndraDyn S Synchronous Motors series. As an IndraDyn S synchronous servo motor, it converts electrical energy into controlled mechanical rotation for positioning axes, packaging lines, and other automated stations where high dynamic response is required. This type of motor is used where accurate speed regulation and repeatable positioning are needed during continuous machine operation.

To manage thermal loads, the motor employs liquid cooling, using internal coolant channels in the stator housing to keep temperature stable during continuous duty. The unit follows a standard mechanical design that keeps mounting dimensions consistent across the series. Position feedback is transmitted over the Hiperface interface, and the optical sensor produces 128 signal periods per revolution. Because the detector uses this technology, it delivers accurate edge detection even at low speed, and its single-turn arrangement reports absolute position for one mechanical revolution. Motion is transferred through a plain shaft, which supports direct coupling, and the unit is supplied without a holding brake, so static load retention must be provided elsewhere.

The dimensional designation places the frame in motor size 101 with motor length E, a combination that balances continuous torque with enclosure volume for medium-power axes. Stator conductors use winding code 0200, which gives the matching drive the electrical values needed for current control. Power enters on the A-side of the housing, giving a fixed reference point for cable routing and strain relief. This layout helps keep installation planning straightforward when the motor is placed near gear units, machine plates, or other tightly spaced components.