Product Description:

The MSK101E-0200-FN-M3-AG0-NNAN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. The unit is used in closed-loop drive systems that require quick acceleration, accurate velocity tracking, and smooth continuous rotation, such as pick-and-place gantries, forming presses, and CNC feed axes. It converts regulated three-phase power from an IndraDrive controller into controlled mechanical output for automated equipment, supporting repeatable motion in demanding industrial cycles.

A sealed internal jacket provides liquid cooling, which removes heat from the stator and supports steady torque output during demanding motion. Position feedback uses the Hiperface serial interface, and its capacitive scanning head resists interference from magnetic dust while maintaining stable signal generation. The data are retained through power cycles by a multi-turn absolute counter, so the axis keeps position information after power is restored. Shaft output is delivered through a plain shaft, and the power conductors terminate on an A-side power connector that points the plug toward the machine front plate. The E-length frame and reduced runout machining help limit radial error at the shaft nose during high-speed operation.

The motor is supplied without a holding brake, so stationary loads must be secured by drive torque or an external clamping device when power is removed. Its frame corresponds to motor size 101, placing it in a larger housing that supports high dynamic performance in demanding axes. The electrical layout uses winding code 0200, which matches the motor to compatible IndraDrive amplifiers for stable current regulation. That electrical match helps the controller maintain smooth motion during repeated acceleration and deceleration.