Product Description:

The MSK101E-0200-FN-M1-BG0-NNNN is an IndraDyn S synchronous servo motor produced by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. It serves as a torque and position actuator, delivering tightly controlled rotation for CNC machinery, automated handling modules, and robotic axes that require coordinated multi-axis motion. In these systems, the motor works with a compatible drive to convert command values into accurate shaft movement during rapid starts, stops, and synchronized path changes. A plain shaft simplifies direct coupling, and the power connector is located on the B-side to help clear adjacent axes.

Thermal management is handled by liquid cooling, a jacket-based circuit that removes stator heat and permits continuous duty at high load. This cooling method removes heat directly from the housing and supports high-load operation without relying on ambient airflow around the motor body. The integrated feedback system communicates through Hiperface, and its disk encoder provides 128 signal periods per revolution for fine interpolation inside the drive controller. Because the sensing principle is optical, position data remain stable against temperature swings and vibration. A housing rated at IP65 prevents dust ingress and water jets from reaching internal components, supporting installation on open machine frames. The motor uses a size 101 frame with length code E, which provides the active magnetic volume for this configuration. The standard design is supplied without a holding brake when external locking is used.

The encoder supplies multi-turn absolute position information, preserving shaft angle over power cycles and removing the need for homing routines. This feedback arrangement helps the controller retain axis reference after shutdowns and planned power interruptions. Rated operation between 0 to 40 °C matches typical cabinet climate control parameters, and insulation class 155 lets the winding varnish tolerate elevated thermal zones without accelerated aging. Winding code 0200 corresponds to resistance and inductance values used by the drive for commutation, helping sustain smooth torque under continuous load.