Product Description:

The MSK101E-0200-FN-M1-AG3-NNNN synchronous servomotor is manufactured by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. Its role in automated production lines is to deliver finely regulated torque and velocity so controllers can position loads quickly and repeatably on indexing tables, transfer axes, and handling systems. The servo motor is intended for machines that require repeatable motion under changing load conditions. A plain rotor shaft, a multi-turn absolute optical encoder, and an electrically released holding brake make the unit suitable for coordinated axis systems that demand real-time feedback and secure standstill holding.

This model employs liquid cooling, allowing continuous current flow without exceeding thermal limits and supporting high power density in compact machine frames. Position feedback is exchanged over the Hiperface interface, and the feedback system provides 128 signal periods per revolution for precise motion control. The optical sensing path minimizes drift, while the multi-turn counter tracks rotations even when external power is removed. An integrated brake supplies 120 Nm of static torque, so suspended or vertical loads stay fixed once motion stops. With a sealing system rated at IP65, the motor resists dust ingress and low-pressure water jets. A plain shaft simplifies coupling to gearboxes, pulleys, or direct-drive joints without keyway stresses.

The motor can operate in ambient temperatures from 0–40 °C, and insulation class 155 permits winding temperatures up to 155 °C before accelerated aging becomes critical. Winding code 0200 identifies the stator configuration used for this model. Motor size 101 and length code E set the stack geometry and inertia, while the power connector is located on the A-side to match common cabinet cable routing. This connector position helps keep power leads aligned with typical machine layouts and reduces cable crossover near the motor. The standard housing also remains compatible with liquid-cooling plates used across the IndraDyn S platform.