Product Description:

The MSK101E-0200-FN-M1-AG0-NNAN is an IndraDyn S synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Classified in size 101, the unit is engineered for closed-loop motion tasks. Its synchronous design supports responsive servo operation where accurate speed and position control are required. It is intended for applications that require high positional accuracy and continuous torque delivery in automated machinery and production cells.

Performance is supported by liquid cooling, which removes stator heat through a coolant jacket and helps preserve winding life during sustained duty cycles. Feedback is supplied through the Hiperface interface; this digital link carries high-resolution position data generated by an encoder that resolves 128 signal periods per mechanical turn. The sensing hardware uses a multi-turn absolute format, allowing the drive controller to recover the exact rotor angle after power loss without homing. An IP65 housing protects the stator and connections from dust and low-pressure water jets. Reduced runout at the output shaft improves coupling accuracy with gearboxes or direct-drive loads. The motor is supplied without a holding brake, so static load retention must be handled externally. Power terminations are placed on the A-side of the frame to simplify cable routing.

An optical scanning principle inside the encoder uses fine-pitch code tracks for high signal fidelity, and the plain shaft helps maintain accurate torque transfer in precision axes. The motor uses Class 155 insulation for thermal endurance, and safe ambient operation spans 0 to 40 °C without derating. This feedback arrangement supports accurate speed regulation during indexing, contouring, and other coordinated movements that depend on repeatable position information. The electromagnetic assembly uses winding code 0200, which matches the drive amplifier current and voltage tables for the motor length E variant and supports direct-coupled use in servo presses, packaging formers, and multi-axis gantries that require tight velocity regulation and rapid indexing.