MSK101D-0450-NN-S1-BP2-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310705
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK101D-0450-NN-S1-BP2-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 57.0 Nm and a continuous current of 50.6 A. It also displays a maximum torque of 160.0 Nmand a maximum current of 187.7 A and a winding inductive of 1,700 mH
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MSK101D-0450-NN-S1-BP2-NNNN synchronous servomotor works along with a drive controller by its manufacturer. This motor supports its use in explosive atmospheres. The product is intended to be used only to avoid the possibility of personnel injury and/or property damage. The device is not intended to be installed in locations where the ambient conditions need higher explosion protection than what is specified on the motor-type plate. The unit cannot be used with accessories from other manufacturers. Its operation, maintenance and repair can be carried out only by qualified personnel. The motor is integrated with an optical encoder featuring 128 signal periods.
The product should be cooled for a sufficient time before repairing or working on it. This device must never be crushed or jammed during handling and mounting. The unit supports a maximum 55°C operating temperature. Its holding brake does not offer assurance of personnel safety. The motor should have securely tightened connectors during an operation. This product has low relative air humidity of 5%. The device tends to have a high temperature when it is overloaded. It is mandatory to do a unit test on the motor if its safety-relevant components have been serviced. This MSK101D-0450-NN-S1-BP2-NNNN motor gives a year’s backup support from Wake Industrial.
The motor houses a single-channel temperature monitor. The unit has separate markings on its time plate for atmospheres with combustible dust and gas. The product features a 155 thermal class according to EN 60034-1 specifications. The device incorporates a fixed bearing. The unit features N concentricity and alignment tolerance. Its encoder resolution depends on the connected controller. The motor shaft comprises a 10x8x70 key and a DS M12 centering hole. This product position and speed are controlled by the related drive controller based on the current position of the motor. This servomotor can be delivered to the preferred destination of your choice.
