MSK101D-0450-NN-S1-BG2-NNNN

  • Rated 4.4 (32 total ratings)
  • MPN: R911311393
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The MSK101D-0450-NN-S1-BG2-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 57.0 Nm and a continuous current of 50.6 A. It also displays a maximum torque of 160.0 Nmand a maximum current of 187.7 A and a winding inductive of 1,700 mH

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

✓ In-Stock!

MSK101D-0450-NN-S1-BG2-NNNN

  • Rated 4.4 (32 total ratings)
  • MPN: R911311393
  • Stock: In-Stock, Ships Fast
  • Factory New Pricing Available!
    Request a Quote!
  • Call for Expedited Shipping and Product Condition Options
The MSK101D-0450-NN-S1-BG2-NNNN is manufactured by Rexroth Indramat Bosch as part of the MSK Servo Motor Series. It features a continuous torque of 57.0 Nm and a continuous current of 50.6 A. It also displays a maximum torque of 160.0 Nmand a maximum current of 187.7 A and a winding inductive of 1,700 mH

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a MSK101D-0450-NN-S1-BG2-NNNN to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The MSK101D-0450-NN-S1-BG2-NNNN synchronous servomotor by Bosch Rexroth must have unhindered vertical convection with a distance of 100mm from adjacent components on the side. The motor features a KTY84 type temperature sensor. This product has an IP 65 degree of protection in compliance with EN 60034-5 specifications. The device must run without load at 800RPM to 1000RPM speed before commissioning after storage if the bearings are more than a year old. The unit features its type designation on the type plate and in its encoder memory. Its transportation and storage must be performed only in horizontal orientation. The motor is to be transported using shock absorbers if there is a chance of vibration.

The product is to be connected to the machine taking the tightening torques into consideration. The device must use only fully tightened cap nuts on its power connector. The unit features the output direction of its electrical connectors towards its B side. Its mechanical and electrical connections must be checked to see that they are intact before the commissioning is done. The motor shutdown can be done only after decelerating the associated drive to standstill mode using the machine-side control commands. The product functionality can get affected adversely due to excessive dust, chips or dirt on its surface.

The motor connection cables have to be checked for damage at regular intervals and replaced if needed. The product will fail to run if the related drive controller is faulty or the holding brake is not released. The device has no negative influence on the environment. This unit is characterized by high durability and ruggedness. It has a length code of D. The motor shaft supports the coupling of machine elements to be driven by using tensioning elements or clamping sets or sleeves. This MSK101D-0450-NN-S1-BG2-NNNN motor with a one-year warranty is sent in custom durable packaging.

MSK101D-0450-NN-S1-BG2-NNNN Documents

  • MSK-101D-0450-NN-S1-BG2-NNNN
  • MSK101D 0450 NN S1 BG2 NNNN
  • MSK101D0450NNS1BG2NNNN

MSK101D-0450-NN-S1-BG2-NNNN Technical Specifications

Continuous Current at Standstill 100 K: 50.6 A
Continuous Torque at Standstill 100 K: 57.0 Nm
Maximum Current: 187.7 A
Maximum Torque: 160.0 Nm
Winding Inductivity: 1,700 mH
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo