MSK101D-0300-NN-S2-RG0-RNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911381480
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK101D-0300-NN-S2-RG0-RNNN synchronous servomotor provided by Bosch Rexroth becomes very hot during operation. This servomotor must be run without load between 800 rpm to 1000 rpm after storage if the bearings are over 12 months old. It shuts down automatically when the surface temperature is 150 °C. The motor features a relative air humidity between 5% and 95%.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth continues to set the standard for product innovation with a vast array of products, such as synchronous motors, spindle motors, drive controllers, drive converters, digital axis controllers, digital controller cards, and inverter modules.
The MSK101D-0300-NN-S2-RG0-RNNN model has a 3.200 mH winding inductance and weighs 40 kilograms. The device has an absolute single-turn EnDat2.1 encoder and a winding resistance of 0.19 ohms. The motor's voltage constant is 113 V/min-1, and its torque constant is 1.80 Nm/A. The MSK101D synchronous motor must be transported between -20 and +80 degrees Celsius, and it cannot be installed at a height of more than 1,000 meters. The motor's highest speed is 4600 rpm, and its maximum torque output is 160 Nm. The model consists of four polar pairs and has a thermal time constant of 100 minutes, which reflects the amount of time required for the motor to cool down by natural convection. It has been suggested that strong oscillations reduce motor efficiency; thus, the motor must be mounted with care. Use only the specified accessories and attachments. The MSK101D synchronous motor is protected against dust and water by an IP65 rating and has an insulation class of 155.
The model MSK101D-0300-NN-S2-RG0-RNNN features a right-side power connector and a plain output shaft. At 60K, the motor provides a constant 50 Nm of torque while using 30.6 A of continuous current. The operating temperature range for this synchronous motor is 0 to +40 degrees Celsius. This model delivers a constant torque of 57 Nm and uses a constant current of 34.9 A at a temperature of 100 K. Wake Industrial provides a one-year replacement warranty on this efficient synchronous motor (MSK101D-0300-NN-S2-RG0-RNNN).
