Product Description:

The MSK101D-0200-NN-M2-BP2-RNNN servomotor is manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. In automated machine tools, pick-and-place stations, and packaging lines, the unit converts electrical power from a matched drive into tightly regulated rotary motion that can be transmitted through belts, gearboxes, or direct couplings for precise axis movement. Its frame and active length increase magnetic stack depth without changing the basic mounting geometry, which helps raise continuous torque while preserving the installation footprint used by the surrounding machine structure.

The motor is classified for FN duty, meaning forced ventilation is not required because heat is dissipated by natural convection. A sealing system rated at IP65 blocks dust and low-pressure water jets, allowing placement outside control cabinets when the surrounding machine layout calls for a sealed motor housing. Feedback is supplied by an optical encoder that uses the EnDat2.1 digital interface and provides 2048 signal periods, while its multi-turn absolute track retains position information through power cycles for immediate reference at startup. Rotor machining with increased concentricity helps reduce radial runout, the stator uses winding code 0200, power is routed through a B-side connector, and the housing follows size 101 for the intended mounting fit.

An electrically released holding brake delivers 70 Nm of static torque so vertical or suspended loads remain secure during stops and power-loss conditions. Drive torque is transferred through a shaft with a keyway, which helps align pulleys and coupling hubs and supports positive mechanical engagement. The windings use insulation rated to class 155, supporting continuous operation at elevated internal temperatures without early varnish breakdown. Within the specified 0–40 °C ambient range, the brake, encoder, and winding system retain full duty ratings during intermittent or continuous operation.