Product Description:

The MSK101D-0200-NN-M1-BG0-NSNN is a synchronous servomotor produced by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. Within automated assembly lines and machine tools, the unit converts controlled drive current into rotational motion while supplying absolute position data to the controller. This closed-loop behavior helps coordinate multi-axis systems that demand repeatable speed, torque, and indexing accuracy. That feedback allows the connected drive to correct position and speed errors during synchronized motion.

Heat from the stator is released by natural convection, so no external blower or liquid circuit is required. Rotor position is monitored by an optical encoder that uses a Hiperface interface with 128 signal periods of fundamental resolution, and the multi-turn absolute design stores revolutions even when power is removed. The motor has size code 101 with length category D, and winding code 0200 indicates its electromagnetic properties. A B-side power connector simplifies cable routing through the cabinet wall, and the plain shaft seats directly in precision couplings to minimize torsional compliance. This feedback arrangement supports precise commutation and stable control at both low and high shaft speeds.

The housing has an IP65 protection rating that blocks dust ingress and water jets encountered during routine washdown. Continuous duty is permitted across an ambient range of 0 to 40 °C without derating, and insulation system class 155 withstands internal winding temperatures produced by rapid acceleration cycles. The motor has a plain shaft without a keyway to reduce backlash in clamped couplings. This model is supplied without a holding brake, so applications that require power-off position retention must use an external mechanical lock or maintain motor torque through the drive. The unobstructed front face helps the motor fit compact mounting arrangements.