Product Description:

The MSK101D-0200-NN-M1-AP0-NNNN is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. It is intended to deliver precise torque and position control in industrial automation axes such as palletizers, gantry drives, and converting lines. This model has motor size 101 and length D, and its mechanical interface uses a keyed shaft for positive power transmission to couplings or gearboxes. The design is suited for applications that require accurate acceleration, deceleration, and repeatable positioning under changing loads.

The motor removes internally generated heat through natural convection, so no external blower or liquid circuit is required for rated operation. Position feedback is handled by a Hiperface encoder that communicates absolute position and electronic nameplate data to compatible IndraDrive controllers. The optical sensor provides 128 signal periods per revolution, allowing fine commutation angle calculation, while its multi-turn absolute design maintains shaft count across power cycles for immediate startup without homing. Because the unit is supplied without a holding brake, any static load must be secured by drive torque or an external latch when power is removed. The housing carries an IP65 protection rating, so dust and low-pressure water jets are kept out when the connector seals are engaged.

The motor uses a shaft with keyway, simplifying direct coupling to standard hubs. Continuous duty is permitted at ambient temperatures from 0 to 40 °C, which suits typical machine-frame and cabinet conditions without derating. Stator windings use code 0200, which corresponds to the electrical values expected by the matching drive. The motor also uses a 155 thermal class insulation system and an A-side power connector orientation.