Product Description:

The MSK101D-0200-FN-M1-BP0-NNNN is an IndraDyn S synchronous servomotor developed by Bosch Rexroth Indramat within the MSK IndraDyn S Synchronous Motors series. The unit converts drive current into precise rotary motion for positioning tasks in automated machinery, packaging lines, and material-handling axes. When used with a compatible drive controller, it supports closed-loop torque and velocity control for repeatable motion in high-cycle industrial service. The motor is suited to servo axes that require consistent acceleration, smooth speed regulation, and accurate positioning during frequent starts and stops.

Heat generated in the stator is removed through liquid cooling, so continuous performance is not tied to cabinet airflow. Feedback is transmitted over the Hiperface serial channel, supporting direct communication with compatible drives. The optical encoder provides 128 signal periods per revolution, and its multiturn absolute design makes position data available immediately after power-up. The housing has an IP65 rating to help block dust and low-pressure water jets during normal industrial use. Power conductors terminate on the motor’s B-side, which can simplify cable routing when the shaft is oriented downward.

The motor uses size 101 with length code D, and the shaft has a keyway for positive torque transfer to couplings or gear inputs. This arrangement supports direct connection to keyed hubs and many gearbox inputs. Permitted ambient operation ranges from 0 to 40 °C, allowing installation near other equipment when coolant flow is maintained. Winding code 0200 is matched to compatible drive current limits for balanced servo response, and insulation rated to Class 155 supports elevated winding temperatures before derating is required. The motor is supplied without a holding brake, so any load that must remain fixed at standstill requires drive torque or an external locking device.