MSK101C-0450-NN-M1-BP0-NNNN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327786
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MSK101C-0450-NN-M1-BP0-NNNN is a versatile and innovative servomotor that is supplied by a three-phase industrial network. Produced by Bosch Rexroth Indramat, this device has a winding resistance of 0.23 Ohm at 20 °C. The maximum rated torque of the unit is 110 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MSK101C-0450-NN-M1-BP0-NNNN synchronous servomotor offered by Bosch Rexroth must be dismounted only after its pressure has been released. This servomotor supports an ambient operating temperature range between 0°C and 40°C. The product might explode if the tensile load of the connection cables has been exalted. This device depicts ignition sparks when its connectors are either connected or disconnected under load. The unit may cause unfavorable damage if its connectors are handled in an energized state. It is necessary to reduce or insulate the energies present in the intermediate circuit using an emergency stop mechanism. This motor must not feature dirt and moisture on its protective conductor connections.
The product is not approved for use in places where explosive materials occur permanently or for a long period. This device is not equipped with leak-proof housing because of unavoidable temperature fluctuations. The unit is UL Listed and CSA Certified. Its installation is permitted at a maximum altitude of 3000m over sea level. This motor features a 3K4 climatic category during operation in compliance with DIN EN 60721-3-3 specifications. The product might exhibit vibrations in the form of sinewave oscillations during stationary use. This device supports a maximum axial load of 10m/s2 on its flange. This MSK101C-0450-NN-M1-BP0-NNNN servomotor has backup support for one year.
The motor features IP 65 protection rating for its output shaft and housing. This product installation is permissible in both horizontal and vertical orientations. The device cannot be coated with an additional varnish on its housing. This unit is fitted with a smooth shaft with a keyway in compliance with DIN 6885-1 specifications. Its shaft sealing ring functions like an abrasive seal. The motor shaft and shaft seal must not have direct contact with the associated machining medium. This product encounters radial and axial forces on the shaft and bearings during its operation. This servomotor shipment is undertaken by reputed freight carriers with a global network.
