Product Description:

The MSK101C-0300-NN-S3-AG0-NNNN is an IndraDyn S synchronous servo motor manufactured by Bosch Rexroth Indramat for the MSK IndraDyn S Synchronous Motors series. In automated machining centers, pick-and-place gantries, and printing lines, the unit generates controlled torque and speed for tightly regulated motion sequences. Integrated feedback provisions enable the drive controller to monitor rotor position in real time, so the motor can execute repeatable positioning tasks, index cycles, or velocity profiles used in industrial automation equipment.

Thermal management relies on natural convection, eliminating external fans and allowing a sealed installation. Environmental protection is rated to IP65, blocking dust ingress and water jets when the housing is properly mounted. The motor operates within an ambient temperature range of 0 to 40 °C; outside this range, derating or supplemental cooling may be required. Position feedback is transmitted through a Hiperface interface that carries both incremental and absolute signals, and the internal scanning head uses capacitive sensing for immunity to magnetic fields. Resolution is fixed at 16 signal periods, giving the controller a fine reference for commutation and position loops. An A-side power connector, thermal class 155 winding insulation, and the standard design package complete the electrical interface.

The encoder is configured for single-turn measurement, so absolute position information resets after one revolution. A plain shaft eases integration with compliant couplings or precision gearheads and reduces complexity compared with keyed versions. The electromagnetic layout uses winding code 0300, matched to drive modules that supply the required current and voltage profile. The motor has a C-length stator and a 101 frame size, and it is supplied without a holding brake.